 |
 |
 |
 |
 |
 |
 |
 |
 |
How it Works When tension is applied to the rope or webbing the Tite-Tie's patented Press-n-Grip 3V Design does its work. What makes the Press-n-Grip 3V Design so special is that two results are created from one action. Firstly, a gripping effect is created on the three Vs holding the Tite-Tie on the rope stopping it from slipping or sliding down. Secondly, at the same time the rope or webbing squeezes the two Tite-Tie pieces together creating gripping force on the lower hooks. It is also worth noting at this point that the Tite-Tie is securely attached to the rope or webbing and no matter how much tension or shaking to the rope or webbing, the Tite-Tie will not fall off. Also note that the force on the rope or webbing is centered with the Tite-Tie, so there's no twisting to make the Tite-Tie come off the rope or webbing like some other lesser products |
 |
| When
the rope or webbing is placed between the two lower hooks, the force
on the lower hooks prevents the rope from slipping back, resulting in holding power without tying any knots. To relase, just pull the rope or webbing up and out of the lower hooks, so easy and very quick to release loads when in a hurry and great if you need to re-adjust, add to or re-tighten a load. |
 |
| Double Hitch Power |
| Car Topping 1. |
| Car Topping 2. |
| Single Tie |
| No Knots Tie Down |
| Double Up |
| Figure S |
| Double Hold |
| Use Two Ways |
| Hoisting |
 |
| Open
printable Instruction Sheet |
Stockist Finder Find your nearest Tite-Tie stockist. Find Now! |  |
|
Send to a friend Let a friend know about this web site. Send NOW! Become a Reseller and/or Distributor If the Tite-Tie interests you and you would like some stock, or if you would like to act as a distributor please contact us Learn More! |
 |
Site Highlights: See the packaging Go there NOW! What do other people think Go there NOW! Get answers to your questions Go there NOW! The main aim of the Tite-Tie Go there NOW! Why choose the Tite-Tie? Go there NOW! |
|
||
The Tite-Tie will get better the older it gets, so scratches and wear will improve the grip to rope and webbing. A handy hint is to roughen the inner surfaces with a coarse sandpaper, this will improve grip instantly. |
|
If your worried about the Tite-Tie separating, try this handy hint. Stack the two Tite-Tie pieces together then get an o-ring washer and place on them as shown below. If you want to know more hints contact the inventor. Contact Now |
 |
 |
|
|
|
Tite-Tie® is a registered trademark and is Internationally Patented. WO 2005/012036 A1 Tite-Tie Industries is an Australian owned company. |
 |